Motul 300V 4T Factory Line Off Road, 15-W60

TYPE OF USE High performance lubricant developed for « Factory Team’s » and designed to offer better clutch “Grip” control with outstanding engine and gear box protection when running under extreme off-road conditions. For 4 stroke engines with or without integrated gearboxes and wet clutch or dry clutch. Racing engines operating at very high temperature and from low to high revs: Dirt bikes, Cross bikes MX. Other use: ATV’s, UTV’s… PERFORMANCE STANDARDS Above existing standards Wet clutch compatibility checked on JASO T903 test Ester TECHNOLOGY For decades MOTUL has developed high performance synthetic Ester based lubricants. By selecting esters over other high performance synthetic base stocks and combining them with an innovative additive package, MOTUL has created a perfect synergy. This most advanced Ester Technology allows maximum torque output of the engine without compromising reliability and wear. - Extra engine torque up to 2.5% for better launch. - Optimized clutch friction indexes for improved life time and better traction in difficult conditions, sand, snow, mod... Outstanding gearbox protection: Thanks to the innovative anti-wear additives package. FZG Gear Test results: Pass FLS>14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates fluid lubricating and wear protection properties at the interface of a loaded set of gears. Lubricants are then graded based on their “Failure Load Stage” or FLS rating from FLS 1 (very poor result) up to FLS 14 (outstanding result). - Stable oil pressure whatever running conditions RECOMMENDATIONS For optimum engine and gearbox performance, avoid mixing with other synthetic or mineral lubricants. Oil change: according to your own use. PROPERTIES Color Visual Yellow / Green Fluo Viscosity grade SAE J 300 15W-60 Density at 20°C (68°F) ASTM D1298 0.872 Viscosity at 40°C (104°F) ASTM D445 154.2 mm²/s Viscosity at 100°C (212°F) ASTM D445 23.5 mm²/s Viscosity Index ASTM D2270 186 Pour point ASTM D97 -36°C / -32.8°F Flash point ASTM D92 232°C / 449.6°F TBN ASTM D 2896 8.4 mg KOH/g